We have
full time mechanics on duty during normal business hours to
help you keep your trailer in top condition.
Drop your
trailer off for an annual maintenance inspection and get your
trailer ready for the season.
We service
all brands of bumper pull and gooseneck trailers and install
receiver hitches, hide-a-way hitches, and brake controllers.
We also maintain a full stock of replacement parts.
Shop
Hours
Monday
- Friday
8:00
am - 6:00 pm
Saturday
8:00
am - 5:00 pm
|
Inspect
and Service every 3 months or 3,000 miles
|
Item |
Inspection/Service |
Structure
- Rubber
mats & floor
- Hinges,
doors, & dividers
|
Remove
mats and clean with power washer. Clean and inspect
floors and walls. Allow mats to dry completely before
reinstallation.
Inspect
and replace damaged, worn, or broken parts.
|
Tires
and Wheels |
Inspect
tires for wear, check inflation pressure.
Check
lug nuts for proper tightness. Replace missing bolts
and nuts.
|
Inspect
and Service every 6 months or 6,000 miles
|
Item |
Inspection/Service |
Tires |
- Rotate
@ 5,000 miles
- Inspect
tread and sidewalls thouroughly. Replace tires when
treads are worn or sidewall is worn or has a bulge
|
Brakes, electric
-
Magnets
-
Controller (in tow vehicle)
|
Check
wear and current draw
Check power output (amperage) and modulation
|
Structure
|
Clean
dirt buildup, lubricate hinges and slides
|
Inspect
and Service every 12 months or 12,000 miles
|
Item |
Inspection/Service |
Brakes,
all types
|
Check
for scoring and wear. Replace per manufacture's specifications.
|
Jack,
Drop leg |
Grease
gears |
Structure
- Frame
- Welds
- Slide-outs
- Axles
and axle attachement bolts
|
Inspect
all frame members, bolts, & rivets. Repair or replace
damaged, worn, or broken parts.
Inspect
all welds. Repair cracked or broken welds as needed.
Clean
dirt buildup. Lubricate slides, shafts, and gears
Have
DEALER check axles and axle attachement bolts.
|
Wheels
- Sealed
Bearings
- Unsealed
Bearings
- Rims
|
Check
and confirm free running. Replace if needed. (Sealed
bearings are not serviceable)
Disassemble,
clean, inspect bearings and races, repack bearings and
reassemble. Replace promptly if immersed in water.
Inspect
for cracks and dents, Replace as needed.
|
|
|